Vis enkel innførsel

dc.contributor.authorIrfan, Muhammad
dc.contributor.authorUn Nabi, Rao Adeel
dc.contributor.authorHussain, Hammad
dc.contributor.authorNaz, Yasin
dc.contributor.authorShukrullah, Shazia
dc.contributor.authorKhawaja, Hassan
dc.contributor.authorRahman, Saifur
dc.contributor.authorGhanim, Abdulnoor
dc.contributor.authorKruszelnicka, Izabela
dc.contributor.authorGinter-Kramarczyk, Dobrochna
dc.contributor.authorLegutko, Stanisław
dc.date.accessioned2023-01-05T14:14:14Z
dc.date.available2023-01-05T14:14:14Z
dc.date.issued2022-12-17
dc.description.abstractThe growing production of plastic waste and improper dumping after use has become a worldwide challenge. This waste is a substantial source of petroleum and can be effectively converted into pyrolytic oil and other useful products. A statistical prediction of the rate constants is essential for optimizing pyrolysis process parameters, such as activation energy (Ea), frequency factor (Ao), temperature (T), and kinetic rate constants (k). In this research, we utilized Box–Behnken using RSM with Design Expert software to predict statistical rate constants at 500 °C and 550 °C. The efficiency of the predicted rate constants was investigated and compared to the findings of experimental rate constants extracted from the literature. At 500 °C, the estimated rate constants did not reveal a significant rise in the oil output since these constants promoted high gas yield. Compared to the experimental rate constants, statistically predicted rate constants at 550 °C demonstrated substantially high-oil output with only 1% byproducts. The experimental rate constants yielded 32% oil at 550 °C, whereas the predicted rate constants yielded 85% oil. The statistically predicted rate constants at 550 °C could be used to estimate commercial-scale extraction of liquid fuels from the pyrolysis of high-density plastics. It was also concluded that Ea, Ao, and T must be analyzed and optimized according to the reactor type to increase the efficiency of the expected rate constants.en_US
dc.identifier.citationIrfan M, Un Nabi RA, Hussain, Naz Y, Shukrullah S, Khawaja HA, Rahman S, Ghanim, Kruszelnicka, Ginter-Kramarczyk, Legutko. Response Surface Methodology Analysis of Pyrolysis Reaction Rate Constants for Predicting Efficient Conversion of Bulk Plastic Waste into Oil and Gaseous Fuels. Energies. 2022;15(24)en_US
dc.identifier.cristinIDFRIDAID 2095986
dc.identifier.doi10.3390/en15249594
dc.identifier.issn1996-1073
dc.identifier.urihttps://hdl.handle.net/10037/28043
dc.language.isoengen_US
dc.publisherMDPIen_US
dc.relation.journalEnergies
dc.rights.accessRightsopenAccessen_US
dc.rights.holderCopyright 2022 The Author(s)en_US
dc.rights.urihttps://creativecommons.org/licenses/by/4.0en_US
dc.rightsAttribution 4.0 International (CC BY 4.0)en_US
dc.titleResponse Surface Methodology Analysis of Pyrolysis Reaction Rate Constants for Predicting Efficient Conversion of Bulk Plastic Waste into Oil and Gaseous Fuelsen_US
dc.type.versionpublishedVersionen_US
dc.typeJournal articleen_US
dc.typeTidsskriftartikkelen_US
dc.typePeer revieweden_US


Tilhørende fil(er)

Thumbnail

Denne innførselen finnes i følgende samling(er)

Vis enkel innførsel

Attribution 4.0 International (CC BY 4.0)
Med mindre det står noe annet, er denne innførselens lisens beskrevet som Attribution 4.0 International (CC BY 4.0)