Vis enkel innførsel

dc.contributor.advisorMeidell, Annette
dc.contributor.authorBjørhovde, Ida J.T.
dc.date.accessioned2024-08-12T12:46:38Z
dc.date.available2024-08-12T12:46:38Z
dc.date.issued2023-05-25
dc.description.abstractThe AutoStore Bins are highly technical plastic products manufactured with injection moulding. To ensure the production parameters are within given specifications, CMM scanning is done on samples from the production.en_US
dc.description.abstractTo fulfil the company’s specifications and guidelines, measurements need to be taken around the Bin, extracted with CMM equipment. Today’s internal setup does not fulfil the specifications, and challenges both the time consumption (two scans instead of one) and the ergonomics for the scanning operators.en_US
dc.description.abstractThis master’s thesis project searches for a solution to the problem by developing a new measuring jig. The product is developed with the existing Bin designs in focus. Important customer attributes are followed to ensure that the product meet the expectations from the users. There are no current existing solutions on the market, as the AutoStore Bin is a tailormade product. This project presents different alternatives and solution concepts, where the final solution is supported with analysis, technical drawings and datasheets.en_US
dc.identifier.urihttps://hdl.handle.net/10037/34264
dc.language.isoengen_US
dc.publisherUiT Norges arktiske universiteten_US
dc.publisherUiT The Arctic University of Norwayen_US
dc.rights.accessRightsopenAccessen_US
dc.rights.holderCopyright 2023 The Author(s)
dc.rights.urihttps://creativecommons.org/licenses/by-nc-sa/4.0en_US
dc.rightsAttribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0)en_US
dc.subject.courseIDEND-3900
dc.subjectVDP::Technology: 500::Materials science and engineering: 520::Polymer and plastics: 523en_US
dc.subjectVDP::Teknologi: 500::Materialteknologi: 520::Plast- og komposittmaterialer: 523en_US
dc.subjectVDP::Technology: 500::Mechanical engineering: 570::Production and maintenance engineering: 572en_US
dc.subjectVDP::Teknologi: 500::Maskinfag: 570::Produksjon og driftsteknologi: 572en_US
dc.titleDevelopment of a Jig for CMM Measurements on AutoStore Binsen_US
dc.typeMaster thesisen_US
dc.typeMastergradsoppgaveen_US


Tilhørende fil(er)

Thumbnail
Thumbnail

Denne innførselen finnes i følgende samling(er)

Vis enkel innførsel

Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0)
Med mindre det står noe annet, er denne innførselens lisens beskrevet som Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0)