It is very important for consumers to have the operating voltages within the specified limit. Sometimes, this is not possible to provide by the grid operators although grid operators invest heavily in voltage regulating devices. With the integration of variable renewable energy systems in the grid, it has become more challenging for the grid companies to regulate them to provide stable voltages and ...

Space debris has become an important topic, and several national and international space agencies are currently studying space debris detection and removal to increase the safety of space missions. UiT the Arctic University of Norway in Narvik is aiming to develop a 2U CubeSat that can perform in-situ detection of debris with the projects UNICube and QBDebris. The mission target is to detect mm-sized ...

This thesis presents the development and validation of a robust Visual-Inertial Odometry (VIO) system tailored for agile unmanned aerial vehicles (UAVs) operating in GPS-denied environments. These environments often challenge traditional navigation systems due to their inherent limitations in urban canyons, indoors, or densely forested areas. The study introduces a novel visual odometry (VO) algorithm ...

To move the global energy away from fossil fuels towards renewable energy leads toward a more complex grid, after experiencing a reduction of inertia when integrating large renewable energy sources (RES). With an increased pace of RES penetration into the grid and along a growing demand of electrical power, the challenge to maintain the system frequency as close as possible to the nominal range ...

The main purpose of the project is to convert the snowmobile to electric and make it operational, which rule out focus on factors as ex. driving range, user interface for performance adjustment, heating for comfort, etc. For mounting the electric motor a suitable and feasible location and motor bracket to easy access the existing gearbox axel, and also in position to a cooling airflow through the ...

Some approaches to achieving full observability and controllability in power systems are explored in this thesis. The core structure of this work consists of observability and controllability, focusing on two key phases of optimization and control. In the first phase, system observability is addressed through optimal placement of Phasor Measurement Units (PMUs). The Connectivity Matrix Algorithm ...

This thesis investigates one of the most favorable converters for integrating fuel cells into a DC microgrid. A current-fed full-bridge isolated DC-DC converter has advantages such as high voltage conversion ratio, low switches’ losses, and low input current ripple which make it one of the best choices for Fuel cells (FC). This converter transfer power to the load through the leakage inductance which ...

This thesis investigates the use of remote sensing techniques to study the conditions of ballast water in the northwestern port of Emden, Germany. Sentinel-2 data of the seaport has been collected and used in order to retrieve the suspended particulate matter (SPM), evaluating its distribution and checking for any time or spatial periodicity over the past 5 years. The aim of the study is to provide ...

The research investigates the effective utilization of hydrogen fuel cells in electric transport applications, addressing the challenges associated with power generation, energy storage, and control. By implementing the MPPT Perturb and Observe (P&O) technique, the thesis aims to optimize the power output of the fuel cell system, ensuring maximum efficiency and performance. To enhance the overall ...

This thesis presents the design and implementation of SEDC machine which was located at machine laboratory in UiT Narvik campus. To improve the efficiency and to have automatic control, the old passive control needs to be replaced with DC-DC converters based active control method. This thesis explores various DC-DC and grid connected converter with the goal to find a suitable and most efficient for ...