Show simple item record

dc.contributor.advisorSziebig, Gabor
dc.contributor.authorMaske, Tomas
dc.date.accessioned2017-05-27T11:01:46Z
dc.date.available2017-05-27T11:01:46Z
dc.date.issued2017-05-23
dc.description.abstractThis study aims to find the maximum, usable, feed limit at different arc-energies and use the findings in multi-pass welding planning for robotic welding, taking into consideration the high controllability of robot movements. A combined studies using numerical analyses and practical experiments to calculate the feed limits for different arc energies. Each weld where analysed both mathematical, physical and thru observation. The combined results for one experiment will form the bases for the next set of experiments. Two feed limits was discovered, one for room temperature metal and one for pre-heated metal. For welding on materials in room temperature, the arc was able to melt the filler, and make a complete fusion with the parent metal, when the energy requirement for melting the filler was under 20 per cent of the total arc energy. For welding on pre-heated metals the energy requirement for the filler was 23 – 24 per cent. The feed limits where tested and confirmed when welding with 2.6 kJ/s (300 A), 2.2 kJ/s (250 A) and 1.6 kJ/s (200 A). Welding at the feed limit, on pre heated metals, produced good welds at arc speed up to 5 millimetres per second. Part of the result is a preliminary welding procedure specification for a specific groove based on the findings in the experiments. It is recommended that the feed limits are tested when welding with filler of different thickness.en_US
dc.identifier.urihttps://hdl.handle.net/10037/11066
dc.language.isoengen_US
dc.publisherUiT Norges arktiske universiteten_US
dc.publisherUiT The Arctic University of Norwayen_US
dc.rights.accessRightsopenAccessen_US
dc.rights.holderCopyright 2017 The Author(s)
dc.rights.urihttps://creativecommons.org/licenses/by-nc-sa/3.0en_US
dc.rightsAttribution-NonCommercial-ShareAlike 3.0 Unported (CC BY-NC-SA 3.0)en_US
dc.subject.courseIDSHO6266
dc.subjectVDP::Teknologi: 500::Materialteknologi: 520::Metallurgi: 521en_US
dc.subjectVDP::Technology: 500::Materials science and engineering: 520::Metallurgy: 521en_US
dc.titleHeavy multi-pass TIG weldingen_US
dc.typeMaster thesisen_US
dc.typeMastergradsoppgaveen_US


File(s) in this item

No Thumbnail [100%x240]
Thumbnail

This item appears in the following collection(s)

Show simple item record

Attribution-NonCommercial-ShareAlike 3.0 Unported (CC BY-NC-SA 3.0)
Except where otherwise noted, this item's license is described as Attribution-NonCommercial-ShareAlike 3.0 Unported (CC BY-NC-SA 3.0)