Master’s Theses in Technology and Safety in the High North: Nye registreringer
Viser treff 21-40 av 71
-
Root Cause Analysis of fire in waste facilities: A case study of Tromsø municipality
(Master thesis; Mastergradsoppgave, 2021-06-01)The amount of waste produced in Norway has been increased considerably in the past decades as a result of population and economic growth. Therefore, the role of waste management companies in society has become more important. One of the significant challenges in the waste facilities is the fire that occurs regularly and causes various problems for the waste management companies. Several causes can ... -
MarSpray LiDAR (MSL) for the comprehensive measurement of Sea Spray for Improving the Prediction of Marine Icing in Cold Conditions
(Master thesis; Mastergradsoppgave, 2021-06-01)Marine icing is a very complicated phenomenon, and its prediction, evaluation, and estimation involve many uncertainties. Commonly, the most severe ice accretion is caused by sea spray. A substantial amount of study is present on sea spray ice accretion about modelling and numerical simulations with certain assumptions and not based on comprehensive real-time data. The past techniques used to measure ... -
Arctic region as a new hydrocarbon production area. Technology needs and equipment availability for the development of the Russian Arctic
(Master thesis; Mastergradsoppgave, 2021-05-16)In this thesis, a number of questions, concerning the present and the future of Russian hydrocarbon policy in the Arctic area are covered, with a description of necessary technologies and main projects that constitute Russian plans for the nearest decade up to 2030 in presence of western technological and financial sanctions, available equipment and potential for localization. The main contribution ... -
Implementation and Control of an Inverted Pendulum on a Cart
(Master thesis; Mastergradsoppgave, 2021-05-28)An Inverted Pendulum on a Cart is a common system often used as a benchmark problem for control systems. The system consists of a cart that can move in one direction on the horizontal plane and a pendulum attached to the cart through a hinge point. The pendulum can rotate 360° on the plane made up of the vertical direction and the direction the cart can move. The system is controlled by applying a ... -
Simulation of Meteorological and Oceanographic Parameters: An Application in Spray Icing Prediction
(Master thesis; Mastergradsoppgave, 2020-07-13)Sea spray icing is considered as a major environmental challenge in the Arctic Ocean, which poses a critical risk not only to the vessels and industrial operations but also to human safety. Although some studies have been carried out to estimate spray icing rate (e.g., RIGICE04 and ICEMOD models), such models suffer from some unrealistic modeling assumptions and limited verification. Moreover, limited ... -
Feasibility study of Preventing Snow Accumulations on Roofs using Airflows
(Master thesis; Mastergradsoppgave, 2020-07-09)This thesis is intended to contribute to research in cold climate engineering. Further it intends to provide a principle solution for structural and avalanche safety due to snowfall on roofs. We have conducted a feasibility study of preventing snow from accumulating on roofs using airflows. This includes empirical, numerical and experimental methods. Snow loads on roofs makes great impact on ... -
A Feasibility Study of Using Waste Thermal Energy from a District Heating System for Absorption Cooling
(Master thesis; Mastergradsoppgave, 2020-07-13)Waste incineration-based district heating plants in Norway struggle from energy efficiency drawbacks during the warmer months of the year from May - September due to the reduced demand in heating. As a result, thermal energy gets discarded to ambient air, which affects the energy efficiency of the plants. This study aims at presenting an overview of the waste incineration industry in Norway and ... -
Study of failure profiles in the bridge structures
(Master thesis; Mastergradsoppgave, 2019-10-15)Bridge safety is an indispensable part of transportation safety. However, each bridge is unique with respect to its material, design and the environment which it is located in, and other relevant factors. This makes defining a unified framework for studying and categorizing failures in the bridges a difficult task. The current report aims at taking the first step to reach such a goal. This report ... -
Resilience assessment of the transport corridor from Stokmarknes to Stockholm
(Master thesis; Mastergradsoppgave, 2019-08-01)Timely delivery of the required goods plays an important role in meeting the availability and reducing the downtime of Markets. Salmon transport logistics is affected in complex ways while operating in the Arctic, since the area is sparsely populated and has insufficient infrastructure. It is also greatly affected by the distinctive operational environment of the region, such as cold temperature, ... -
CFD modelling of pollutant transport. Use of ANSYS Workbench® simulating emissions to air from vessel at Port of Breivika.
(Master thesis; Mastergradsoppgave, 2019-05-31)Historically, the Port of Tromsø is well known as the final port before entering the Arctic Sea. Nowadays, there is a noticeable traffic consisting of cruise vessels visiting Port of Tromsø before heading against the Arctic. The vessels transport passengers expecting clean air, midnight sun, northern lights, snow and ice; - and a clean environment. Environmental considerations and air pollution ... -
The effect of human factors on safety related to barrier management
(Master thesis; Mastergradsoppgave, 2019-05-31)The aim of this thesis is to establish information on barrier elements where human errors take place and to establish proactive measures to eliminate these errors. The three main objectives for this project is to review the current safety and barrier management approach in Equinor, identify to what degree human factors have an impact on safety and make recommendations for improvements on safety and ... -
The Cruise Industry and the Polar Code. Implementing the Polar Code.
(Master thesis; Mastergradsoppgave, 2019-05-31)The mandatory Polar Code is now set into force with strengthened requirements for vessels operating in polar waters. There are many challenges, and the polar environment adds an increased risk level. The preventive actions towards mitigating risks are more important due to the harsh environment, long distances and limited options for assistant rescue. Most accidents and incidents have pre-occurring ... -
New Perspectives for an Intelligent Risk-Based Decision Support Framework for Asset Integrity Management. Means for Sustainable Asset Integrity Management in the Norwegian High-North.
(Master thesis; Mastergradsoppgave, 2018-11-20)The Norwegian Arctic - Barents Sea, is attracting more oil and gas developments. The associated growth of assets will face heightened integrity issues considering the prevalent climatic and challenging operating conditions in the Arctic. This thesis focuses on identifying asset integrity management critical success factors which are often neglected but are the bed rock of asset integrity management. ... -
Thermography and tensile tests of steel samples. Study of material properties and internal friction effects
(Master thesis; Mastergradsoppgave, 2018-06-01)The thesis presents analysis of material properties and internal effects in steel samples, with varying temperatures. Uniaxial tensile tests were conducted in both room temperature and low temperatures, to generate graphical measures of the mechanical properties. The steel samples were monitored with thermography throughout the course of the tensile tests, to investigate the heat generation associated ... -
Friction tests on polyurethane and concrete. Rolling friction tests and sliding friction tests on anti-abrasion polyurethane, anti-seepage polyurethane and concrete.
(Master thesis; Mastergradsoppgave, 2018-06-01)The climate in arctic areas of the world is a challenge for airports. Snow and ice accumulates on the runways, forcing airports to close for snow clearing. Pilots need to know that the friction is at a respectable level before they land, and may have to return if not. This thesis looked at a polymer called polyurethane, and if this material could be used as a new runway material, considering both ... -
Oil Spill Preparedness and Response in the Arctic. The effect of low temperature on oil spill response operations in the Arctic with respect to overall equipment effectiveness
(Master thesis; Mastergradsoppgave, 2018-06-02)Effectiveness is an important term in oil spill response operations. Literature often relate to the level of effectiveness connected to either mechanical containment and recovery, in-situ burning or chemical dispersant application. The term effectiveness in oil spill response operations can be related to existing theory and the perspective of Overall Equipment Effectiveness (OEE). The perspective ... -
Icing Effects on Power Lines and Anti-icing and De-icing Methods
(Master thesis; Mastergradsoppgave, 2018-05-30)Icing on power lines may lead to compromise safety and reliability of electric supply network. Prolong icing can lead to power breakdown and collapse of towers. Since power transmission lines are mostly overhead and could face the direct impact of icing, and it is one of the main challenges faced by power distribution companies in cold regions. When the ice accretion crosses the safety limit then ... -
Navigation in the Arctic. How can simulator training be used for assessment and reduction of risk?
(Master thesis; Mastergradsoppgave, 2018-06-01)Over the recent years, the ship traffic in the polar areas has increased. There is reason to believe that this traffic, and especially the cruise traffic, will increase further as the ice retracts towards the poles. There is also reason to believe that with the continued focus and exposure of the Polar Region, the cruise tourism to the region will grow.The increased presence in the polar areas will ... -
The Characteristic of Cold Metal Transfer (CMT) and its application For Cladding
(Master thesis; Mastergradsoppgave, 2017-06-01)Corrosion and wear has been a major challenge in most of our industries. CMT process has been selected as a weld technique because of its low heat inputs that makes it a promising technique for industrial application. However, the aim of this thesis is to study the competence of CMT welding process in cladding of mild stainless steel and performing a qualitative fault tree analysis. Furthermore, the ... -
Finite element analysis of materials for aquaculture net cages. FEA of materials for aquaculture net cages using ANSYS Workbench
(Master thesis; Mastergradsoppgave, 2017-06-20)The number of good sites in less exposed locations for aquaculture farming is limited. Trends are now that the fish cages are increasing in both width and depth as well as more weather-exposed locations are taken into use. As the net cages continues to increase in size, so does the material costs. The design of the sea cages should be modified for safe and reliable use in remote offshore locations. ...