With increasing popularity of carbon fiber reinforced polymer (CFRP) over time, the need of research in the field increases along with it. The aim of this project was to study the mechanical properties of CFRP with varying temperature settings. A four-point bending test was performed to find the deflection of CFRP in room temperature, and after being exposed to cold temperature. A numerical test was ...

Polymers have an extreme wide range of potential applications. From artificial heart valves, computer hardware, coating materials, noise damping materials and so on. Polyurethane is one of the such materials with a broad range of applications. A few such applications and properties are, but not limited to, treatment of leakage of an expansion joint, abrasion resistance, anti-freezing performance and ...

The harsh climate of the arctic has always been one of the most difficult areas to drive cars in. The severe loss in traction due to snow and icing on the roads, has led to an increased risk of collisions. The winter tires for cars has developed through the years after their introduction in the 1930’s. There have been three revolutionary changes made since then; implement of studs, changing in tread ...

The global demand for energy is increasing in the current scenario of industrial development and offshore wind energy has a great potential to become a key player specifically in Europe’s renewable energy future. Naturally the flow of wind in offshore environments is more consistent and also the average wind velocity is higher than onshore. However, the cost of electricity generated from offshore ...

This thesis is a part of a master’s degree in Technology and Safety in the High North at the University of Tromsø- The Arctic University of Norway. The thesis has been written during the spring semester of 2016. Safety is a large part of maritime operations and all tools to improve safety and reliability is considered. Even in these days when economy in the oil related industry is worse than ever. ...

The drilling industry still faces the challenge of acquiring accurate and viable precision of subsurface pressure data. To address this, drilling industry is keen to establish accurate and reliable measurement of pressure in wellbore and to estimate the pore pressure and fracture pressure profile with utmost precision. In any drilling operation, it is important to maintain the annulus pressure ...

Marine fish farming is one of Norway’s largest industries and exports. The industry is in rapid development and secures employment for several thousand people, all along the Norwegian coastline. Fish farming is regarded as a relative sustainable method for food production. However, the industry is still prone to certain challenges and problems. Escape of fish, for instance, is one of the industry’s ...

Snow avalanches claim in excess of 200 lives annually on a worldwide basis. However, since the invention of the first effective avalanche transceiver, the process of locating victims has remained fundamentally unchanged. Humans as a carrier for locating devices are perceived to be inefficient when moving over rugged avalanche debris, and potentially exposed to excessive risk from secondary avalanches. ...

The oil and gas installations are associated with risk due to different degradation mechanisms. Microbial Influenced Corrosion, commonly known as MIC, is one of them. The failures caused by MIC may have significant impacts on health, safety and environment (HSE). Therefore, to avoid failures regular inspection of the assets and maintenance plans need to be executed. With this on mind, engineers try ...

The aim for the thesis is to look at the performance of natural refrigerants in heat pumps while operating in a colder climate. The advantage of using natural refrigerants is that they have significantly lower global warming potential (GWP) in comparison to the synthetic refrigerants i.e. hydro fluorocarbons (HFC) and hydro chlorofluorocarbons (HCFC). Natural refrigerants are becoming common to use ...