Additive manufacturing process allows fabrication of parts with a broad range of sizes with high resolution. This size variation introduces new mechanical properties within the printed component, which creates a significant challenge for the qualification of additively manufactured parts. This unresolved issue hinders the implementation of additive manufacturing in high performance engineering ...

A hybrid CFD–ML model for the prediction of sea spray icing, SPICE2, was developed in Part 1 of this study in Deshpande et al., 2024. The SPICE2 model is an extension of the ML model, SPICE, where some of the variables required for icing rate predictions: local wind speed, spray duration, spray period, and spray flux, are computed from CFD simulations. These, along with the air and water ...

Sea-spray icing is one of the major hazards for small- and medium-sized vessels in polar regions. Predominant anti- and deicing measures include prevention by heeding the weather forecasts and avoiding high-risk situations, protection by enclosing exposed and high-priority areas, manual ice removal by personnel, heat tracing and surplus heat. Energy is in limited supply on vessels, and alternative ...

Prestressing of bridges allows construction of long spanned bridges made from thin structural members with high flexural and shear capacity. Studies have shown that some of the existing prestressed bridges are not meeting their designed service life due to corrosion of the tendons. The main reasons are poor construction practices in combination with inadequate inspection and maintenance plans. ...

Fly ash-based geopolymers represent a new material, which can be considered an alternative to ordinary Portland cement. MiniBars™ are basalt fiber composites, and they were used to reinforce the geopolymer matrix for the creation of unidirectional MiniBars™ reinforced geopolymer composites (MiniBars™ FRBCs). New materials were obtained by incorporating variable amount of MiniBars™ (0, 12.5, 25, 50, ...

Geobacter and Shewanella are the most characterized electroactive bacteria genera. Unlike genus Geobacter that is strictly anaerobic, Shewanella can grow under both oxic and anoxic environments and is capable of metabolizing a wider substrate range. In the present study, the use of strain Shewanella baltica 20 in MFC-based biosensor for BOD monitoring is reported. The S. baltica strain 20 was isolated ...

Increased traffic and interest in arctic regions necessitate measures to ensure the safety and functionality of vessels. Sea-spray icing is one of the significant hazards for small- and medium-sized vessels in polar waters. Ice cover can restrict access to essential parts of a vessel and compromise its stability. Existing deicing measures, such as heat or chemical application and manual ice removal, ...

In response to the increasing demand for construction informatics (CI) expertise, universities in the Nordic countries have developed new educational offers. This study explores how CI related education is being delivered by three different universities, two in Norway and one in Sweden. By comparing curricula and interviewing CI teachers, this paper contributes to the recent debate on the international ...

The microbial fuel cell (MFC) technology is emerging as an effective technology for wastewater treatment to remove and detect many pollutants and simultaneously generate power. The anode is an essential component for bacterial attachment and extracellular electron transfer (EET). Thus, anode performance is critical for improving an MFC system's overall performance. Materials that are electronically ...

Microbial fuel cells (MFC) are emerging technologies that can produce electricity while treating wastewater. A series of tests were carried out to evaluate the efficiency of this technology for treating dairy wastewater (DWW). The experiments used Shewanella baltica as an exoelectrogen in a small single MFC to treat simulated DWW. The impacts of various operational factors, specifically pH, ...